Bathtub Application Instructions

Step 1
Put on the supplied gloves. Place one of the supplied sponges on the bottom surface of the Bathtub. Take the bottle marked "STEP ONE – PREP/CLEANER" and pour contents onto the sponge. Proceed to clean the entire bottom surface of the bathtub and the interior sides of the bathtub with the Prep / Cleaner solution. Rinse thoroughly with water and remove the sponge. Be sure that all Prep / Cleaner residue has been completely rinsed away. Proceed to next step.

Step 2
Keeping the gloves on, close the drain. Take the second sponge and place it on the Bathtub’s surface. Pour the entire contents of the bottle marked “Step Two – Treatment” onto the sponge. Move the sponge slowly and carefully around the entire bottom walking surface only of the Bathtub, for approximately 5 minutes. Any longer than 5 minutes is not recommended. Do not splash product and do not allow any areas you are treating to dry in this time period. There is no reason to treat anything but the tubs bottom / walking surface.
 
Step 3
Take the entire contents of the bottle marked “Step Three – neutralizer” and pour it into the Bathtub. Using the same sponge, completely mixing the solutions together. This will convert the treatment into a biodegradable and nontoxic residue. Now, simply open the drain and thoroughly rinse with clean water.

It’s just that simple.